Video
Specifications
Olmia UR20 Robotics Palletbooster (2024)
Set of three Olmia Palletboosters, each built around a Universal Robots UR20 cobot with 20 kg payload and 1,750 mm reach, covering full Euro pallet height from one position. A belt system connects six folder gluers to the three palletisers, each with a frame for two pallet positions and a double discharge roller conveyor.
The package also includes six case sealing and labelling stations (SOCO System case sealers and Weber label print & apply systems) as well as approx. 75 m of conveyors, forming a complete end-of-line system from folder gluer to pallet.
Two Matco A-700 pallet stretch wrappers are also included.
Equipment
Robot
- Cobot with 25 kg payload
- Reach: min. 1,500 mm / 59 in
- Frame for three pallet positions
- Signal tower
- Including belt system that connects 6 folder gluers to Olmia Palletboosters
Gripper System
- Vacuum gripper, product-specific design
- OnRobot Quick Changer Kit (1x quick changer robot side, 2x quick changer tool side)
- OnRobot 2FGP20 electric gripper for open cases, incl. handling of interleaf sheets
Interleaf Sheet Handling
- Interleaf sheet magazine with 2 levels
Infeed
- Integration into existing conveyor belts
- Sensors for product detection on the infeed conveyors
- "Full run" sensor per conveyor
Discharge
- Double discharge roller conveyor
Case Sealing and Labelling Stations (6x)
Each station consists of:
- SOCO System case sealer
- Top and bottom tape heads
- Side belt drive
- Polycarbonate safety guards
- 3 x 400 V, 50 Hz, 3 A
- Compressed air 0.6 to 1.0 MPa, approx. 0.6 Nl per cycle
- Roller conveyor section between sealer and labeler
- Weber label print & apply system
Note: Case sealers and label print & apply systems are from different years of manufacture.
Pallet Stretch Wrappers (2x)
- Matco A-700 turntable stretch wrapper
- Year: 2019
- Maximum load: 2,000 kg
- Turntable with loading ramps for pallet truck access
- Touch panel control
- Film carriage on vertical mast
- Electrical: 1 x 230 V, 50 Hz
- Weight: approx. 580 kg each
Conveyor System (total approx. 75 m)
- Modular plastic belt conveyors (blue), approx. 50 m in 5 sections
- Stainless steel infeed conveyors to the palletisers, approx. 25 m
Features: - Stainless steel frames with adjustable feet
- Geared motor drives
- Pull-wire emergency stop along the conveyors
- Adjustable side guides
Technical Details
| Parameter | Value |
|---|---|
| Robot payload | 25 kg / 44 lbs |
| Robot reach | min. 1,500 mm / 59 in |
| Pallet positions | 3 |
| Interleaf sheet magazine | 2 levels |
| Palletisers | 3x Olmia Palletbooster (2024) |
| Case sealers | 6x SOCO System |
| Label print & apply | 6x Weber |
| Pallet stretch wrappers | 2x Matco A-700 (2019) |
| Years of manufacture | Palletisers 2024, stations from different years |
| Conveyors, total length | approx. 75 m |
| Case sealer power supply | 3 x 400 V, 50 Hz |
| Case sealer air supply | 0.6 to 1.0 MPa |
| Wrapper max. load | 2,000 kg |
Need More Information?
Our experts are ready to answer your questions and help you make the right choice.